UGA Extension Office

Soil & Water Testing

Soil sample

Soil Testing

If you have questions about your lawn, garden, trees, etc. we always suggest starting with a soil test.

It is not necessary to come by and pick up the bags first. You may bring your DRY sample into our office in plastic bags, cups, or any kind of container. We will transfer it over to a UGA soil bag. Bring in 2 cups of dry soil.

The cost per sample is $10.00 (cash or check) and the results are either Emailed or mailed. We are open Monday through Friday, 8:00am to 5:00 and close 12:00-1:00 for lunch.


Developing and maintaining productive soils begin with soil testing. Soils tests provide information on the soil’s actual nutrient status. Test results are used to determine the amount and kind of nutrients that should be added for the best growth of lawn, garden, and other types of plants.

Steps in Soil Sampling

Recommendations about when and how to apply nutrients are only as good as the soil sample submitted for analysis. To obtain a representative soil sample, the following steps are useful: identify sampling locations (zones), determine the sampling depths, use the right sampling tools, sample at the right time, and handle the samples accordingly.

1. Sampling Locations

soil sample location

Figure 1. Area divided according to vegetation and soil characteristics. Yellow dots indicate sampling points.

Map out the area where the plants are to be grown or are presently growing. This will help in record keeping and ensure that the soil is taken from throughout the entire area. Divide the area such that each soil sample represents one plant type or condition. An area that has been divided according to obvious differences in plant types, plant performance, soil types, and drainage is shown in Figure 1.
•Use a zigzag approach when taking samples. Collect 8-10 soil samples from each location (zone) as shown in Figure 1.
•For trees and shrubs, take soil samples from six to eight spots around the drip line of the plants.

2. Sampling Depth

The depth of sampling depends on the type of plants being grown.
•For lawns, sample to a depth of 4 inches.
•For gardens, ornamentals, mixed fruit trees, and wildlife plots, sample to a depth of 6 inches.

3. Sampling Time

Soil sampling should be done well in advance of planting or spring green-up. This allows adequate time for sample analysis, data interpretation, and fertilizer and lime application.

4. Sampling Tools

Use clean sampling tools and containers to avoid contaminating the soil sample. Never use tools or containers that have been used for fertilizer or lime. Collect samples with tools like trowels, shovels, spades, hand probes or hand augers.

5. Sampling Procedures

Clear the ground surface of grass thatch or mulch (Figure 2). Using a trowel, push the tool to the desired depth into the soil. Push the handle forward, with the spade still in the soil to make a wide opening. Then, as shown in Figure 3, cut a thin slice from the side of the opening that is of uniform thickness, approximately 1/4-inch thick and 2 inches in width, extending from the top of the ground to the depth of the cut. Collect from several locations. Combine and mix them in a plastic bucket to avoid metal contamination. Take about a pint of the mixed soil and place it the UGA soil sample bag. Be sure to identify the sample clearly on the bag and the submission form before mailing.


Figure 2. Remove grass thatch or mulch before sampling.


Figure 3. Soil sampling with a trowel.

Sample Handling

Samples should be air dried overnight. Dry samples on a flat surface lined with clean white paper. Take care to avoid contamination. After drying, transfer the sample to the soil sample bag and bring it to your local extension office.

water sample

Water Testing

Public and municipal water supplies are routinely tested and must meet standards established by the Environmental Protection Agency (EPA). Therefore, these sources usually do not need to be tested unless inhouse contamination is suspected. However, only YOU are responsible for the safety of your well water.

When you pour yourself a glass of water to drink, it may appear clean, taste good, and you may expect it to be safe. However, many sources of water we assume are safe may contain dissolved minerals, organic compounds or even live organisms at harmful concentrations. Contaminated water used for drinking and cooking may affect your health. Also, high concentrations of certain minerals in your water can result in quality issues such as unpleasant taste and odors or staining of bathroom fixtures and/or laundry.

The cost for the basic test is $25.00. Please contact our office for more information about what is included in the basic test and your options for more extensive testing.

Water samples should be collected from the kitchen faucet or from the faucet used most often for drinking.

Samples will be sent to a laboratory at UGA and results will be available in 7-10 business days.

More Information

Have Questions? Need Help?

The Cherokee County Extension Office is here to serve you. 

Contact Us

Frequently Asked Questions

Q: When and how often should soils be tested?

A: Soils can be tested any time during the year. However, allow enough time for the analysis and for fertilizer and lime application. Lime reacts slowly and, if possible, it should be mixed with the soil two to three months before planting. Generally, fall is the most desirable time to sample because landscapes and gardens are usually dry and easily accessible.

Once medium or high fertility levels are established, lawn and ornamental areas need to be sampled every two to three years.

Vegetable gardens should be sampled every 1 to 2 years.

Q: How soon will I get my results back (turn-around-time)?

A: The analysis takes two to three working days from the time the lab receives the samples. In general, it takes 7 to 10 days from the time we receive the samples to the time you get your test reports back.

Q: Who do I contact regarding my soil test results and recommendations if I don’t understand the numbers?

A: The Soil Test Report provides an interpretation of all soil tests done by the Soil Testing Lab and is accompanied by appropriate nutrient and lime recommendations.