- Sanitation ? Exclusion ? Prevention
- Hand Weeding
- Living Mulch
- Other Alternative Methods
Weed management is one of the most critical and costly aspects for container nursery production. High irrigation and fertilization rates create a favorable environment for weed growth in addition to crop growth. Weeds can quickly out-compete the crop for light and other resources, reducing the rate and amount of crop growth as well as salability (Berchielli-Robertson et al., 1990; Norcini and Stamps, 1992). Weed management in nursery production is most effectively achieved by preventative practices, primarily with the use of pre-emergent herbicides (Gilliam et al., 1990; Gallitano and Skroch, 1993).
However, there are valid reasons for managing weeds using alternatives to synthetic herbicides (Sidebar 1). Ornamental crops encompass a wide array of species, and herbicide products must be tested on each for effective, safe and legal use. Even when a product is labeled for a crop, it may not be sufficiently effective for the weeds present or may induce crop damage under certain circumstances. Finally, use of synthetic herbicides in greenhouses and other enclosed structures is often prohibited on product labels.
Reasons for not using synthetic herbicides:
Increased emphasis on sustainability also results in growers choosing alternatives to synthetic herbicides. The Floriculture Sustainability Research Coalition (http://sustainablegreenhouse.wordpress.com/) defines sustainable production as a practice that aims to reduce environmental degradation, maintain agricultural productivity, promote economic viability, conserve resources and energy and maintain stable communities and quality of life (Dennis et al., 2010; Hall et al., 2010). Social, economic and regulatory issues might influence nursery producers to adopt sustainable production methods. With the adoption of more sustainable practices, producers should also have the ability to reduce input costs related to fertilizers and chemicals as well as reduce potential point source nutrient and chemical pollution. In addition, sustainable production of nursery plants could foster the development of new specialty nurseries, thus creating a market niche for "locally grown using sustainable methods."
Weed management alternatives to synthetic herbicides include sanitation, exclusion, prevention, hand weeding, mulching and use of cover crops, heat and non-synthetic herbicides. Only some of these alternative methods can be used to control weeds in containers, but all can be used to manage weeds around containers and in non-crop areas. Also, most alternatives are not used alone because they cannot individually achieve weed control comparable to synthetic herbicides. Two or more alternatives are usually used simultaneously in order to achieve acceptable levels of weed control.
Sanitation ? Exclusion ? Prevention
One of the most effective and economical means of avoiding weed problems is preventing their presence through exclusion and sanitation (Chappell et al., 2012; Diver et al., 2008; Wilen 2010; Sidebar 2). These practices prevent or reduce the number of weed seeds and propagules (bulbs, corms, rhizomes and stolons) that can grow and reproduce, compounding weed management efforts. The first critical step in reducing weed infestations is to follow adequate sanitation measures during propagation and liner production. Liners are often the initial source for new weed species into production areas (Chappell et al., 2012; Wilen 2010). Few, if any, herbicides may be used in this phase of production, necessitating reliance on sanitation and hand weeding. When receiving liners from an outside source, it is critical to monitor containers for weed emergence and to remove weeds before they reproduce and spread. If possible, visit liner and seed vendors to check out their sanitation practices before doing business with them. Additionally, equipment, containers, substrates and fertilizers used in production should not contain weed seeds or propagules (Case et al., 2005; Wilen 2010; Chappell et al., 2012). Simply washing equipment and containers and covering substrate storage areas can significantly reduce weed pressure.
Effective methods for weed exclusion,
Seeds are the primary source of weeds in production environments (Wilen, 2010). Considering the immediate nursery environment is the source of most weeds (Cross and Skroch, 1992), the elimination of seed-bearing weeds within and adjacent to production areas can greatly reduce weed incidence and severity. This may entail working with neighboring property owners to be effective. Surface irrigation water also may be a source of weed seed if not sufficiently filtered before application (Kelley and Bruns, 1975). To reduce weed introduction via irrigation water, weeds from the periphery of surface water supplies should be controlled prior to seed set. Irrigation intake pipes should be placed below the water surface yet high enough to avoid suction of sediment from the bottom of the water source. This is often accomplished using a floating dock system to suspend the intake pipe in the water column.
Regardless of prevention efforts, wind, equipment, birds and other animals (including humans) will eventually introduce weeds (Wilen, 2010). Non-chemical control of weeds is done on a very limited basis in the nursery industry; however, it is critical to scout regularly for invading weeds and deal with them before they mature and spread. Hand weeding is extremely labor intensive and thus an expensive control option (Mathers, 2003; Neal, 2003). In addition, it may be difficult to find laborers willing to work for wages typical of the geographic area where the nursery is located, particularly near urban areas.
Nonetheless, hand weeding is an integral part of any successful weed control program since even pre-emergent herbicides are not 100 percent effective in eliminating weeds. In field nurseries, mechanical cultivation is practiced, but typically as a supplement to an herbicide regime. Therefore, weed management should include regular scouting and hand weeding or mechanical control to prevent emerging weeds from maturing and dispersing seed. Nurseries should strive to create a culture where "no weeds" is everyone's mantra.
Mulch is applied to the substrate surface to create a physical barrier that inhibits weed seed germination and suppresses weed growth (Ferguson et al., 2008). Mulch is a traditional means of weed management in field nurseries and landscapes and may be adapted to container production (Case et al., 2005; Billeaud and Zajicek, 1989).
Two general types of mulch have been adapted to container production: disk barriers and loose-fill products. Disk barri 0185 ers are permeable or impermeable products in the shape of a disk with a slit for placing the disk around a stem and on the substrate surface. Disk barriers include impermeable, disk-shaped solid plastic or cardboard lids, and permeable barriers composed of woven or particlebased products held together by resins or other binders (Chong, 2003; Mathers, 2003; Frangi et al., 2010; Figu 5FEB re 1; Sidebar 3).
Disks can be useful for weed control, may reduce water loss from container plants and have been shown to neither positively nor negatively affect plant growth (Ruter, 1997; 1999). However, disks have issues of cost, handling, irrigation, fertilization and problems with fitting containers adequately to prevent weeds, especially with multi-stem plants (Chong, 2003; Mathers, 2003; Ruter, 1999). If utilizing impermeable disks, plants must be irrigated below the disk via drip irrigation to maintain adequate soil moisture. Additionally, fertilizer must be placed under the disk to maximize plant growth (Ruter, 1999).
Disks must be installed by hand, increasing labor costs. Disks must fit the container exactly or there will be gaps between the disk edge and container rim where weeds can grow (Figure 2). Even with exact container fit, there will be gaps along the disk installation slit and around the plant stem where weeds can grow. In addition, the disk system is limited to plants with a central leader because disks are not designed to fit around multiple stems. Finally, some disk products may be blown away or displaced by wind, resulting in exposed substrate where weeds can grow. Disks are usually removed before sale and often may be reused several times; however, both practices involve additional labor.
Loose-fill mulches are applied as a top-dressing to the container substrate (Smith et al., 1997; Mervosh and Abbey, 1999; Chong, 2003; Mathers, 2003; Case et al., 2005; Ferguson et al., 2008; Cochran et al., 2009). Many loose-fill mulches are agricultural byproducts that are locally available and inexpensive (Sidebar 4). The ideal loose-fill mulch provides little or no nutrients, dries quickly after irrigation, resists decomposition, applies easily, is cost effective, non-toxic to humans and crops, readily available and will be accepted by customers. Few products have many of these characteristics.
Weed control efficacy of loose-fill mulches generally increases with increasing depth of application (Smith et al., 1997; Penny and Neal, 2003; Cochran et al., 2009). Application of loose-fill mulches may be mechanized (e.g., during potting; Chong, 2003). However, there are challenges associated with this option. Some mulches may contain weed seeds or phytotoxic components. Organic mulches often facilitate weed seedling development and may reduce available nitrogen near the substrate surface if not composted (Billeaud and Zajicek, 1989). Spillage during handling and production is an issue. Most loose-fill mulching systems are considered more costly than an effective pre-emergence herbicide program, but an economic comparison of such systems has not been reported.
Living mulches are used with success by many field nursery crop producers (Diver et al., 2008) and can be adapted to container production, particularly with deciduous crops in winter (Figure 5). These living mulches or cover crops may be used as a seasonal ground cover that suppresses weeds without competing with crop production. Such systems must be customized to local conditions to find the right combination of crop, living mulch species and other compatible weed management practices.
Other Alternative Methods
Most other non-traditional alternatives to synthetic herbicides are not adapted to managing weeds in containers but may be applied around containers and in non-crop areas. For example, heat can be used to manage weeds in non-crop areas (Mathers, 2011). Heat acts to kill weeds by denaturing proteins in cell membranes and breaking down the cellular structure of the weed. Alternatively, heat can induce water within cells to boil, thereby exploding cells and desiccating the plant. Application equipment has been developed to apply heat via propane-generated flame, infrared emitters and direct application of boiling water or steam. Solarization, in which sunlight warms soil in a plastic-enclosed area, results in high temperatures that kill weeds, seeds and disease and pest organisms (Stapleton et al., 2008).
Alternatives to synthetic herbicides include natural chemicals, such as acids, soaps, oils and salts that can act as contact herbicides (Diver et al., 2008). These non-synthetic herbicides are best used as a targeted spray or in noncrop areas because contact can lead to damage of plants in production. It is important to note these products do not kill roots and repeated applications will be necessary for weeds that have the ability to regenerate from their roots.
For example, solutions of vinegar can be sprayed to damage weeds (Diver et al., 2008; Fausey, 2003). Vinegar is a product of fermentation containing about 5 percent acetic acid. It is more effective as a non-synthetic herbicide when concentrated to levels of 15 percent and 30 percent acetic acid by distillation and freeze evaporation, respectively. Acid solutions are believed to cause changes in plant cell pH that result in loss of cell membrane integrity and eventual death.
Similarly, salts of fatty acids (soaps) act by penetrating cells and disrupting cell membranes, ultimately causing desiccation and death (Diver et al., 2008). Soaps include pelargonic acid, ammonium nonanoate and potassium salts of fatty acids.
Plant-based oils such as cinnamaldehyde (the primary component of cinnamon) have been used as contact herbicides (Diver et al., 2008; Fausey, 2003). Oils are believed to cause disruption of cell membranes. Plant-based oils include clove, eugenol, lemongrass, citrus, thyme and oregano.
Salts such as sodium chloride (table salt; Mathers, 2011) or ammonium chloride (Fausey, 2003) can be used to kill plants. They cause dehydration of plant tissue via osmosis. Some combination products mix acetic acid, salt, citrus oil, eugenol, etc.
Other alternative products include hydrogen dioxide (Fausey, 2003) and plant byproducts. Corn gluten meal, derived from processing corn, has not proven effective in containers (Mervosh and Abbey, 1999; Wilen et al., 1999), particularly in high rainfall/irrigation areas. Mustard seed meal has shown promise for use with crops grown in the ground (Boydston et al., 2011; Handiseni et al., 2011) but has not been evaluated for use in containers. Finally, although there have been advances in biological control of arthropod pests and plant pathogens in nursery crops, no such strategies are currently available for weed control in nurseries.
Berchielli-Robertson, D.L., C.H. Gilliam and D.C. Fare. 1990. Competitive effects of weeds on the growth of container-grown plants. HortScience 25(1):77-79.
Billeaud, L.A. and J.M. Zajicek. 1989. Influence of mulches on weed control, soil pH, soil nitrogen content, and growth of Ligustrum japonicum. J. Environ. Hort. 7(4):155-157. December 1989.
Boydston, R.A., M.J. Morra, V. Borek, L. Clayton, and S.F. Vaughn. 2011. Onion and weed response to mustard (Sinapis alba) seed meal. Weed Sci. 59(4):546?552.
Case, L.T., H.M. Mathers, and A.F. Senesac. 2005. A review of weed control practices in container nurseries. HortTechnology 15(3):535?545.
Chappell, M.A., J. Williams-Woodward and G. Knox. 2012. Sanitation- A Key to Plant Health: From Start to Finish Part 2: Sanitation in General Production Areas. University of Georgia Cooperative Extension, University of Georgia, Athens. In press.
Chong, C. 2003. Experiences with weed discs and other nonchemical alternatives for container weed control. HortTechnology 13(1):23-27.
Cochran, D.R., C.H. Gilliam, D. Eakes, G.R. Wehtje, P.R. Knight, and J. Olive. 2009. Mulch depth affects weed germination. J. Environ. Hort. 27:85?90.
Cross, G.B. and W.A. Skroch. 1992. Quantification of weed seed contamination and weed development in container nurseries. J. Environ. Hort. 10(3):159-161. September 1992.
Dennis, J.H., R.G. Lopez, B.K. Behe, C.R. Hall, C. Yue, and B.L. Campbell. 2010. Sustainable production practices adopted by greenhouse and nursery plant growers. HortScience 45:1232?1237.
Diver, S., L. Greer and K.L. Adam. 2008. Sustainable small-scale nursery production. ATTRA. 28 pp. www.attra.ncat.org/attra-pub/nursery.html
Fausey, J.C. 2003. Controlling liverwort and moss now and in the future. HortTechnology 13(1):35-38.
Ferguson, J., B. Rathinasabapathi and C. Warren. 2008. Southern red cedar and southern magnolia wood chip mulches for weed suppression in containerized woody ornamentals. HortTechnology 18(2): 266-270.
Frangi, P., R. Piatti, G. Amoroso, and A. Fini. 2010. Non-chemical alternatives for weed control in containerized plants. Acta Hort. 885:119?122.
Gilliam, C.H., W.J. Foster, J.L. Adrain, and R.L. Shumack. 1990. A survey of weed control costs and strategies in container production nurseries. J. Environ. Hort. 8:133?135.
Gallitano, L.B. and W.A. Skroch. 1993. Herbicide efficacy for production of container ornamentals. Weed Tech. 7:103?111.
Hall, T.J., R.G. Lopez, M.I. Marshall, and J.H. Dennis. 2010. Barriers to adopting sustainable floriculture certification. HortScience 45:778?783.
Handiseni, M., J. Brown, R. Zemetra, and M. Mazzola. 2011. Herbicidal activity of Brassicaceae seed meal on wild oat (Avena fatua), Italian ryegrass (Lolium multiflorum), redroot pigweed (Amaranthus retroflexus), and prickly lettuce (Lactuca serriola). Weed Tech. 25(1):127?134.
Kelley, A.D. and V.F. Bruns. 1975. Dissemination of weed seeds by irrigation water. Weed Sci. 23(6):486-493.
Mathers, H. 2003. Novel methods of weed control in containers. HortTechnology 13(1):28-34.
Mathers, H. 2011. Green vs. Greener: Alternative Ornamental Weed Control. Groundwork 2011 (May): 7-8, 10- 13. May 2011. http://www.lcamddcva.org/GW/d_gw_0511.pdf
Mervosh, T.L. and T.M. Abbey. 1999. Evaluation of fabric discs, mulches and herbicides for preventing weeds in containers. Proc. Northeastern Weed Sci. Soc. 1999:122.
Neal, J. 2003. Understanding and managing nursery weeds, Technical Nursery Papers, Issue 11. Nursery & Garden Industry Australia, Epping, NSW, Australia. 4 pp. November 2003.
Norcini, J.G. and R.H. Stamps. 1992. Container nursery weed control, Circular 678. Revised August 1994. Florida Cooperative Extension Service, Institute of Food and Agricultural Sciences, University of Florida, Gainesville, FL. 11 pp.
Penny, G.M. and J.C. Neal. 2003. Light, temperature, seed burial, and mulch effects on mulberry weed (Fatoua villosa) seed germination. Weed Tech. 17:213?218.
Ruter, J.M. 1997. Effects of Texel Geodiscs on evaporation from #1 and #7 containers. Proc. Southern Nursery Assc. 42:420-422.
Ruter, J.M. 1999. Tex-R Geodiscs and fertilizer placement influence growth of ?Compacta? holly. Proc. Southern Nursery Assc. 44:55-57.
Smith, D., C. Gilliam, J. Edwards, D. Eakes, and J. Williams. 1997. Recycled waste paper as a landscape mulch. J. Environ. Hort. 15:191?196.
Stapleton, J.J., C.A. Wilen, and R.H. Molinar. 2008. Pest Notes: Soil solarization for gardens & landscape management, UC ANR Publication 74145. UC Statewide IPM Program, University of California, Davis, CA. 5 pp.
Wilen, C.A. 2010. UC IPM pest management guidelines: Floriculture and ornamental nurseries: Weeds, Publication 3392. UC Statewide Integrated Pest Management Program, University of California, Davis. pp. 153-160.
Wilen, C.A., U.K. Schuch and C.L. Elmore. 1999. Mulches and subirrigation control weeds in container production. J. Environ. Hort. 17(4):174-180.
1 This document is ENH, one of a series of the Environmental Horticulture Department, Florida Cooperative Extension Service, Institute of Food and Agricultural Sciences, University of Florida. Original publication date September 2012. Visit the EDIS Web site at http://edis.ifas.ufl.edu.
2 Assistant Professor and Extension Horticulturist - Nursery Production, Department of Horticulture, University of Georgia, 211 Hoke Smith Building, Athens, GA 30630.
3 Extension Specialist and Professor, Environmental Horticulture Department, University of Florida/IFAS, North Florida Research and Education Center, 155 Research Road, Quincy, FL 32351.
4 Professor and Extension Cut Foliage Specialist, Environmental Horticulture Department, University of Florida/ IFAS, Mid-Florida Research and Education Center, 2725 South Binion Road, Apopka, FL 32703.
Status and Revision History
Published on Sep 13, 2012
Published with Full Review on Mar 28, 2017