- Nest Habits
- Finding Nests Is Key to Eliminating Carpenter Ants
- Treating Nest Sites Indoors
- Treating Nest Sites Outdoors
- Control when the Nest Cannot Be Found
- Selecting a Pest Control Professional
Carpenter ants are so-called because of their habit of chewing wood to create nest sites. They do not eat wood, like termites, but they excavate it with their strong, saw-like jaws to create random galleries where they nest. Carpenter ants are also a nuisance because of their abundance and large size.
Damage to wood caused by carpenter ants (above left) is different than the damage to wood caused by subterranean termites (right). Carpenter ants chew wood with and across the grain, while termites only damage wood with the grain. Furthermore, termites often line their galleries with mud, while carpenter ant galleries are smooth, clean, and devoid of mud and other debris.
Carpenter ants are the largest of the pest ants found in Georgia. In Georgia, there are two pest species of primary importance: the black carpenter ant (Camponotus pennsylvanicus) and the Florida carpenter ant (Camponotus floridanus). Black carpenter ants are dull black and their abdomens are covered by yellowish hairs, while the Florida carpenter ant has a deep reddish-colored head and thorax and a shiny, black abdomen. Since ants from a single carpenter ant nest vary greatly in size, ant size alone is usually not a good characteristic for identification. Carpenter ants vary in size from about ¼ to ½ inch. To confirm their identify, collect a few ants in a vial filled with a preservative such as rubbing alcohol, and send them to a Cooperative Extension Service county agent. Look in the white pages under county name for the phone number of the nearest county extension office.
In Georgia, carpenter ants become active in the spring (March/April) and remain active through the early fall (September/October). During the winter, ants become inactive and hibernate in their nest to survive the cold. The habitat where carpenter ants are most common include areas abundant in mature hardwood trees typified by older, well-established suburban neighborhoods.
Carpenter ants are most active at night, when it is not uncommon to see 10- to 20-fold or more ants than would be seen during daylight hours. Ants emerge about 15 minutes after sundown and leave the nest in large numbers in search of food, traveling up to hundreds of feet from the nest on semi-permanent trails. Unlike other pest ant species, carpenter ants create semi-permanent trails through the grass from their nest to areas where they collect food. Movement between nest sites and between nest sites and feeding sites is often facilitated by the use of these well-maintained, semi-permanent trails. In the evening, ants can be seen using these trails as they emerge from and return to their nest. Colonies may even use the same trail in different years. Carpenter ants also follow man-made guides such as wall edges when foraging.
Carpenter ants feed mainly in the tops of trees, where they consume the sweet, sugar-rich honeydew directly from aphids and scale insects that are found feeding on the tree's sap. Honeydew is nearly pure sugar, and is excreted by aphids and scale insects in large quantities during the spring and summer months. Many ant species depend on honeydew as a stable, predictable source of food throughout the warm season.
Carpenter ants may establish nest sites inside and/or outside the home. Some examples of where carpenter ants have been found nesting inside are in moisture-damaged wood around chimneys and skylights, under bathtubs, inside dishwashers, in wall voids beneath window sills, inside hollow doors and door frames, under fiberglass insulation in crawl-spaces, and in wall voids in wood porch supports and columns, under siding and wood shingles, and in moisture-damaged eaves. In general, wood suffering from moisture damage will attract and be used by carpenter ants as nest sites because damp wood is easier for the ants to chew than sound, dry wood. Damp wood combined with warm temperatures also promotes the survival, growth and reproduction of carpenter ant colonies.
Outdoors, nest are most commonly found in hardwood trees containing treeholes. Most large hardwood trees contain a treehole or other imperfection where ants might nest. In treeholes, ants find an environment that is ecologically stable (consistent humidity and temperature) and protected from adverse environmental conditions and natural enemies. There they chew dead wood to create galleries for nest sites. Colonies are less commonly found in stumps, logs, railroad ties or similar large pieces of wood.
Outdoors, black carpenter ant nests are found almost exclusively in trees containing treeholes, while the Florida carpenter ant is more opportunistic. It is found not only nesting in trees but also under loose debris found lying on the ground (e.g., roof shingles, cardboard boxes, logs, etc.).
The key to eliminating carpenter ant infestations is to find the nest and remove it, either physically (by vacuum) or by treating it with an insecticide. Inspect all locations listed as indoor and outdoor nest sites in the previous section. To find nest sites indoors, follow a few foraging ants to learn where they might be nesting. This excites the ants, allowing the inspector to detect their presence by hearing their raucous movements. Look for small piles of wood debris -- resembling sawdust -- that ants drop from the next during excavation of the wood. Close examination of the debris may also reveal parts of dead carpenter ants and the uneaten, discarded pieces and parts of prey insects brought into the nest for food.
Carpenter ants found in the house often-times can be found nesting outdoors in trees. To find outdoor nest sites, inspect each large tree (greater than 6 inches in diameter), beginning 15 to 20 minutes after sundown, by walking around it while shining a flashlight up and down the trunk. If a nest is present, you will see ants moving up and down the trunk as they leave from and return to the nest with food.
Since carpenter ants use permanent trails, use a flashlight to find ants on the trail, then follow them as they move to and from their nest. Finding just part of the trail can be a tremendous help in finding the nest. After locating several points along a trail, a directional pattern will emerge and often lead directly to the nest. Look for sawdust at the bases of trees. Since carpenter ants must excavate wood to expand their galleries, it is common to find piles of sawdust on the ground at the base of a tree where carpenter ants nest. As mentioned previously, carpenter ants do not consume wood, but they must chew it to build and expand nest galleries. Galleries are created by biting off small pieces of wood and disposing of it to the outside. The small bits of wood often pile up at the base of a tree and look very much like sawdust.
Either physically remove indoor nests or treat them with an insecticide labeled for ant control indoors. Use insecticidal dusts and/or aerosols to eliminate carpenter ant infestations indoors. Apply small amounts of dust into voids where the ants are known to be nesting, are suspected of nesting, and/or in voids that they use when foraging. Dusts must be placed into the voids so they will not be contacted. Since dusts become airborne very easily, it is advisable to wear a protective mask when applying dusts.
Apply dusts so a very thin film settles in treated areas. Place dusts behind electrical outlets and switch plates and in the voids under window sills. Small holes (1/8 inch) may also be drilled into drywall in areas where ants are suspected of nesting. Place dust into the void and patch the hole with drywall cement.
Aerosol formulations may also be used when indoor ant nests are visible and accessible. For example, when nests are uncovered during inspection, spray all ants with an aerosol before they can disperse.
Never use water-based or other wet formulations in voids. Wet formulations not only damage drywall, insulation and wood molding, but there is a danger 0048 of electrical shock and/or fire when using liquids around electricity. 5E42
Outdoors, pour a water-based, liquid insecticide directly into carpenter ant nests located in treeholds. Use enough insecticide to thoroughly saturate the entire nest and all ants inside. This may require pouring 1 gallon or more of liquid insecticide into the nest. It is important to saturate all nest galleries with insecticide. If the nest is awkwardly positioned and difficult to reach with a liquid spray, it may be necessary to drill a small hole (¼ to ½ inch) into the top of the suspected nest location. This allows the liquid insecticide to be introduced and allowed to flow downward through the nest.
When treating carpenter ant nest sites inside and outside, the choice of a particular product or brand name is not as important as the choice of formulation and the direct treatment of ants and/or nest sites. Carpenter ants are not resistant, or immune, to any insecticide.
Often the nest cannot be found or, if found, cannot be easily treated. Under these circumstances, use baits and/or treat outside with a liquid spray.
Baits are an effective means of controlling ants in some cases. Indoors, use liquid baits and baits contained in childproof, plastic bait stations; outdoors, use liquid and granular baits. For liquid baits, soak a small cotton ball and place it on a piece of aluminum foil in areas where ants have been seen. Granular baits should be delivered from two or three small piles (about the size of a quarter) placed in areas where ants have been seen (e.g., next to semi-permanent trails and trees containing nests).
Perimeter treatments are used as means of keeping ants from entering a structure. To conduct a perimeter treatment, spray the outside walls with a water-based liquid insecticide 2 to 3 feet up, and spary the ground (including shrubbery, mulch, flower beds, etc.) 5 feet away from each wall. Spray as many areas traveled by carpenter ants as possible, and concentrate spray treatments to areas where ants might enter the structure (e.g., around doors and windows). As part of the perimeter spray program, apply a liquid insecticide to to the trunk of each tree on which carpenter ants have been seen. This treatment strategy will kill ants moving up and down the tree trunk.
Perimenter treatments should be re-applied every four to six weeks during the summer and within a week following a heavy rain. Typical perimeter treatments often require 7 to 10 gallons of liquid spray.
Homeowners can take several measures to help prevent future problems with carpenter ants. Eliminate sources of excess moisture to help make the home a less desirable nesting site to ants and other pests. Fix leaks around attic vents, pipes and sinks, and around chimneys and skylights. Replace water-damaged wood. Dry out the crawl space by installing a vapor barrier and foundation vents. Keep rain gutters clean and adjust drain spouts so water flows away from the building. Install rain gutters if they do not already exist.
Trim tree limbs away from the structure. Foraging carpenter ants often enter structures by bridging to roofs and siding from tree branches in contact with these surfaces.
It is often best to employ a licensed pest control firm, especially when nests are difficult to find. The company chosen should conduct a thorough and complete inspection that results in location of the nest or at least a probable nest site before treatment. Although locating the nest is not always easy, it is the key to eliminating the carpenter ant infestation. Avoid having a pest management professional return to spray each month or whenever carpenter ants are seen. The infestation will continue unless nests are found and eliminated. If nests are found and treated, it is unlikely that additional services for carpenter ant control will be needed, since carpenter ant nests are fairly small and grow very slowly.
Because of their nesting habits, carpenter ants can be persistent pests in and around homes. The key to eliminating a carpenter ant infestation is to find the nest and remove it. Look both indoors and outdoors for carpenter ant nests, and use the most appropriate control strategy to eliminate the infestation. If insecticides are used, they must be used judiciously. Follow label guidelines strictly. If problems persist, seek the advice and services of a pest managment professional and your county extension agent.
Status and Revision History
Published on Apr 05, 2003
Published on Mar 13, 2009
Published with Full Review on Mar 30, 2012
Published with Full Review on Jan 30, 2017